BBSGD - EPOXY(ZINC DUST PIGMENTED PRIMER) 463-6-4
- MSDS: BBSGD
- Manufacturer: SIKKENS AEROSPACE FINISHES DIV
- Product Name: EPOXY(ZINC DUST PIGMENTED PRIMER) 463-6-4
- National Stock Number: 8010-00F005321
Product Identification
Product ID:EPOXY(ZINC DUST PIGMENTED PRIMER) 463-6-4
MSDS Date:01/01/1987
FSC:8010
NIIN:00F005321
MSDS Number: BBSGD
Responsible Party
Emergency Phone: (213) 320-6800
Cage: OO274
Contractor
Telephone: (213) 320-6800
Cage: OO274
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <5%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <5%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: <5%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: <5%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:HEADACHE/NAUSEA/DIZZINESS. BREATHING VAPOR WILL
CAUSE THROAT & EYE IRRITATION.
First Aid
First Aid:SKIN: WASH AFFECTED AREA WITH SOAP & WATER. EYE: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES, CONSULT PHYSICIAN. INGESTION:
CONSULT PHYSICIAN IMMEDIATELY. INHALATION: REMOVE VICTIM TO FRESH
AIR, CONSULT PHYSICIAN.
Fire Fighting
Flash Point:23F (TCC)
Lower Limits:1.2%
Extinguishing Media:USE FOAM/CO2/STEAM/WATER FOG/DRY CHEMICALS. DON'T
USE WATER.
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED
SURFACES/PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE WITH AIR BETWEEN
UPPER AND LOWER EXPLOSION LIMITS.
Accidental Release
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION & CLEAR FUMES
FROM AREA. PREVENT LIQUID FROM ENTERING WERS, WATER SOURCES,OR LOW
AREAS. KEEP UNNECESSARY PERSONNEL AWAY. SHUT F SOURCE, IF POSSIBLE
TO DO SO W/OUT HAZARD. CONTAIN SPILLED LIQUID WITHAWDUST.
Handling
Handling and Storage Precautions:MATERIAL IS SENSITIVE TO MOISTURE &
SHOULD BE KEPT IN CLOSED CONTAINERS. DON'T HANDLE OR STOREEAR
FLAME/HEAT OR STRONG OXIDANTS. VENT REQUIRED.
Other Precautions:CONTAINERS OF THIS PRODUCT MAY BE HAZARDOUS WHEN
EMPTIED THESE CONTAINERS OBTAIN PRODUCT RESIDUES (VAPOR, LIQUID,
ETC). HANDNG EQUIPMENT SHOULD BE ELECTRICALLY GROUNDED.
Exposure Controls
Respiratory Protection:USE APPROVED RESPIRATORY PROTECTION SUCH AS AN
AIR-SUPPLIED MASK.
Ventilation:MECH: EXPLOSION-PROOF VENT EQUIP. NO SMOKING OR LIGHTS.
Protective Gloves:CHEM-RESISTANT
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Supplemental Safety and Health
MSDS DATE: 10/85. WT/GAL: 19.2 LBS.
Chemical Properties
Boiling Pt:B.P. Text:176-321F.
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:55.3
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, INORGANIC ACIDS SPARKS & OPEN FLAME
Stability Condition to Avoid:STORAGE AT HIGH TEMPERATURES.
Hazardous Decomposition Products:ON COMBUSTION CO, CO2, OXIDES OF
NITROGEN.
Disposal
Waste Disposal Methods:CONSULT DISPOSAL EXPERT AND ENSURE CONFORMITY
WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.